NC-DRILL JOB REPORT FILE:C:\EDWinXP\User\SERIAL ALPHANUMERIC LCD\VER3\SERIAL_LCD_VER3.DJR
Send this report file to the manufacturer along
with below listed NC-Drill database file

NC-Drill database file name: SERIAL_LCD_VER3.NCD

NC OUTPUT FROM: EDWinXP (VER. 1.20 REV. 20030502)   
BOARD SERIAL_LCD_VER3    
   
PIN HOLES  VIAS  TOP - BOTTOM    
ASCII ABSOLUTE  INCH  
FORMAT 2. 4 TRAILING ZEROS OMITTED  

PATCH- 0    
TOOLS USED (INCH / MM)  
T01-0.020 / 0.5 ( 29)   
T02-0.036 / 0.9 ( 20)   
T03-0.040 / 1.0 ( 19)   
STOP